MR.Mark Setter MS-232 - Decal Setting Solution - 40 ml Decal liquid

MR. Mark Setter MS-232 helps you secure decals firmly to painted surfaces and reduces the chance of them lifting after drying. This 40 ml water-soluble decal adhesive is particularly effective on older decals that have lost adhesion or transfers with a weak adhesive layer. Its redesigned formula uses acrylic resin adhesive for improved bonding and also provides stronger softening action, helping decals conform more closely to the surface.

Apply a small amount where the decal will be placed, position the decal on top and gently press it down with a lightly dampened cotton swab, Mr. Clean Stick 2 or a dust-free cloth. Remove any excess liquid to prevent excessive softening. Because the formula works quickly, overapplication may damage the decal or affect the painted surface. You can dilute MR. Mark Setter with water to slow its action; on water-based hobby colours, approximately 30 percent dilution is a useful guideline depending on drying time, amount applied and how thoroughly it is wiped away. Always allow the paint to dry fully and test first when necessary.

For hard decals that do not soften easily, carefully apply a small amount of MS-231 Mr. Mark Softer after positioning. If air bubbles or silvering appear once the decal has dried, make a small hole with a needle or craft knife and apply Mark Softer again. A glossy base surface can also help prevent silvering before application. Order MR. Mark Setter MS-232 from Most-Models.com and give your scale-model decals a clean, secure and professional finish.

Features:
– Water-soluble decal adhesive supplied in a 40 ml bottle
– Improves adhesion on old decals and transfers with weak adhesive
– Redesigned acrylic resin adhesive offers stronger bonding than the previous formula
– Stronger softening action helps decals conform to painted surfaces
– Primarily intended for application underneath the decal
– Can be diluted with water to reduce rapid softening and surface damage
– Remove excess liquid with a damp cotton swab or dust-free cloth
– A gloss base and correct application help prevent silvering and decal lifting

Add MR. Mark Setter MS-232 Decal Adhesive 40 ml to your basket today and finish your decals with confidence through Most-Models.com.